1. Triantafyllou, M.S., Kardomateas, G.A., and Bliek, A., "The Statics and Dynamics of the Mooring Lines of a Guyed Tower for Design Applications," Proceedings, Third International conference on Behavior of Offshore Structures, Cambridge, MA, pp. 546-561, August 1982.
2. Schmueser, D.W., Kardomateas, G.A. and Mase, G.T., "Material Design Parameters Affecting the Compressive and Bending Load Capacity of Delaminated Angle-Ply Composites," Proceedings, Third Annual ASM/ESD Conference on Advanced Composites, Detroit, MI, pp. 83-91, September 1987.
3. Kardomateas, G.A. and Schmueser, D.W., "Effect of Transverse Shearing Forces on Buckling and Postbuckling of Delaminated Composites Under Compressive Loads," Proceedings, 28th SDM AIAA/ASME/ASCE/AHS Conference, Monterey, CA, pp. 757-765, April 1987.
4. Johnson, N.L. and Kardomateas, G.A., "Structural Adhesive Joints for Application to a Composite Spaceframe - Analysis and Testing," Proceedings, Seventh International conference on Vehicle Structural Mechanics, Detroit, MI, pp. 85-91, April 1988.
5. Kardomateas, G.A., "Large Deformation Effects in the Postbuckling Behavior of Composites with Thin Film Delaminations," Proceedings, 29th SDM AIAA/ASME/ASCE/AHS/ASC Conference, Williamsburg, VA, pp. 382-390, April 1988.
6. Kardomateas G.A., "Asymptotic Analysis Considerations on the Initial Postbuckling Behavior of Delaminated Composites," Fifteenth Southeastern Conference on Theoretical and Applied Mechanics (SECTAM XV) Atlanta, Georgia, March 1990.
7. Carlson R.L., Kardomateas G.A. and Bates P.R., "A Review of the Effects of Overloads on Fatigue Crack Growth," 1990 USAF Structural Integrity Conference, San Antonio, Texas, December 1990.
8. Kardomateas G.A., "The Initial Phase of Transient Thermal Stresses Due to General Boundary Thermal Loads in Orthotropic Hollow Cylinders," ASME 1990 Winter Annual Meeting, Dallas, Texas, November 1990.
9. Kardomateas G.A., "Fracture Analysis of Microlaminate Composites with Plastically Deforming Matrices," in Anisotropy and Localization of Plastic Deformation; Proceedings of Plasticity '91: The Third International Symposium on Plasticity and Its Current Applications, Grenoble, France, J-P Boehler and A.S. Khan eds, pp. 23-27, Elsevier Applied Science, London, 1991 (invited paper).
10. Kardomateas G.A., "A Theory for Cylindrically Orthotropic Thick Composite Shells," presented at the Eighth International Conference on Composite Materials (ICCM/VIII), Hawaii, July 1991.
11. Carlson R.L. and Kardomateas G.A., "An Examination of Short Fatigue Crack Growth", 1991 AHS Specialists' Meeting, Hampton, VA, October 1991.
12. Soediono A.H., Kardomateas G.A. and Schrage D.P., "Stress Intensity Factor Computations for Corner Cracks Using the Boundary Element Method", 1991 AHS Specialists' Meeting, Hampton, VA, October 1991.
13. Kardomateas G.A., "Failure Prediction in Composite Shell Structures", Mechanics of Composites Review, Dayton, Ohio, pp. 131-140, November 1991 (Invited).
14. Chung C.B. and Kardomateas G.A., ``Moisture Induced Transient Stresses in Orthotropic, Thick Shells Under Pressure'', Proceedings of the Sixteenth Southeastern Conference on Theoretrical and Applied Mechanics, pp. II. 15.1-II.15.8, The University of Tennessee Space Institute, Tullahoma, TN, April 1992.
15. Kardomateas, G.A. , ``Stability Loss in Thick, Orthotropic Cylindrical Shells Under External Pressure'', Proceedings, 33rd SDM AIAA/ASME/ASCE/AHS Conference, Dallas, TX, April 1992.
16. Carlson R.L. and Kardomateas G.A., ``The Effects of Negative R Ratio on Fatigue Crack Growth'', 1992 USAF Structural Integrity Program Conference, 1-3 Dec. 1992, San Antonio, Texas.
17. Kardomateas G.A., ''Boundary-Layer Transient Hygroscopic Stresses in Orthotropic Thick Shells'', presented at MEET'N'93, First Joint Meeting of ASME, ASCE, SES, University of Virginia, Charlottesville, Virginia, June 6-9, 1993, and published in AMD-Vol. 164, pp. 17-31 (invited paper).
18. Kardomateas G.A., ''Bifurcation of Equilibrium in Thick Transversely Isotropic Cylindrical Shells Under Axial Compression'', presented at MEET'N'93, First Joint Meeting of ASME ASCE, SES, University of Virginia, Charlottesville, Virginia, June 6-9, 1993, and published in AMD-Vol. 159, pp. 113-126 (invited paper).
19. Kardomateas G.A. and Chung C.B., ''Buckling of a Thick Orthotropic Shell Under External Pressure Including Hygroscopic Effects'', presented at MEET'N'93, First Joint Meeting of ASME ASCE, SES, University of Virginia, Charlottesville, Virginia, June 6-9, 1993, and published in AMD-Vol. 162, pp. 213-226 (invited paper).
20. Carlson R.L., Blakeley E., Kardomateas G.A. and Beevers C.J., ''Effects of Negative R Values on Fatigue Crack Growth'', in Fatigue '93, Proceedings of the Fifth International Conference on Fatigue and Fatigue Thresholds, held 3-7 May 1993, Montreal, Quebec, Canada, pp. 877-882.
21. Kardomateas G.A., ``Delamination Growth During the Initial Postbuckling Phase in Composite Plates'', Proceedings, Ninth International Conference on Composite Materials (ICCM/9), Madrid, Spain, 12-16 July, 1993, Vol. VI, pp. 479-486.
22. Kardomateas G.A., ``Bifurcation of Equilibrium in Thick Orthotropic Cylindrical Shells Under Axial Compression'', Proceedings, Ninth International Conference on Composite Materials (ICCM/9), Madrid, Spain, 12-16 July, 1993, Vol. IV, pp. 422-429.
23. Kardomateas G.A., ''The Initial Postbuckling and Growth Behavior of Internal Delaminations in Composite Plates'', presented at the 1993 ASME Winter Annual Meeting, New Orleans, Louisiana, Nov 28-Dec3, 1993, and published in AMD-Vol. 179, pp.175-189.
24. Kardomateas, G.A., ``A Solution for the Initial Postbuckling and Growth Behavior of Internal Delaminations'', Proceedings, 34th SDM AIAA/ASME/ASCE/AHS/ASC Conference, LaJolla, CA, April 9-12, 1993, pp. 2679-2688.
25. Kardomateas G.A. and Malik B., ``Delamination Growth Under Cyclic Compression in Composite Plates'', ASTM Fifth Symposium on Composite Materials: Fatigue and Fracture, May 4-6, 1993, Atlanta, GA.
26. Kardomateas G.A. and Philobos M.S., "Buckling of Thick Orthotropic Cylindrical Shells Under Combined External Pressure and Axial Compression", Proceedings, ICCE/1 (International Conference on Composites Engineering), Aug 28-31, 1994, New Orleans, LA, pp. 1049-1051.
27. Kardomateas G.A., Carlson R.L. and Ferrie C.H., "A Micromechanical Model for the Fiber Bridging of Macro-Cracks in Composite Plates", presented at the 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994 , and published in Failure Mechanics in Advanced Polymeric Composites, ASME AMD-vol. 196, (G.A. Kardomateas and Y.D.S. Rajapakse editors), pp. 75-92.
28. Kardomateas G.A., Pelegri A.A. and Malik B., "Growth of Internal Delaminations Under Cyclic Compression in Composite Plates", presented at the 1994 International Mechanical Engineering Congress and Exposition, Chicago, Illinois, November 6-11, 1994 , and published in Failure Mechanics in Advanced Polymeric Composites, ASME AMD-vol. 196, (G.A. Kardomateas and Y.D.S. Rajapakse editors), pp. 13-29.
29. Philobos M.S. and Kardomateas, G.A., "Analysis and Design of Thick Composite Cylindrical Shells Subjected to Axial Compression", Proceedings, 26th International SAMPE Technical Conference, October 17-20, 1994, Atlanta, Georgia, vol. 26, pp. 201-214.
30. Kardomateas, G.A. and Carlson R.L., "An Inelastic Discrete Asperities Model for the Effects of Compressive Load Excursions in Fatigue Crack Growth", Proceedings, 36th AIAA/ASME/ASCE/AHS/ASC SDM Conference, New Orleans, LA, April 10-13, 1995, pp. 2052-2059.
31. Kardomateas, G.A., "Stable and Unstable Delamination Growth in Compressively Loaded Composite Plates", Proceedings, 36th AIAA/ASME/ASCE/AHS/ASC SDM Conference, New Orleans, LA, April 10-13, 1995, pp. 2690-2699.
32. Kardomateas G.A., "Three-Dimensional Elasticity Solution for the Buckling of Moderately Thick Orthotropic Columns", presented at SES'95 (Society of Engineering Science 32nd Annual Technical Meeting), Oct 29-Nov 2, 1995, New Orleans, LA, and published in Contemporary Research in Engineering Science, (edited by R.C. Batra), Springer-Verlag, Berlin, pp. 238-253, 1995 (invited).
33. Kardomateas G.A. and Malik B., "Fatigue Delamination Growth Under Cyclic Compression in Glass/Epoxy Composite Plates", Proceedings, 1995 AHS National Technical Specialists Meeting on Rotorcraft Structures, Williamsburg, Virginia, Oct 30-Nov 2, 1995.
34. Kardomateas, G.A., "Three-Dimensional Elasticity Solution for the Buckling of Thick Orthotropic Cylindrical Shells Under Combined External Pressure and Axial Compression", in Advanced Composites in Emerging Technologies, Proceedings, comp'95 (4th International Symposium on Advanced Composites), 18-22 September, 1995, Corfu, Greece, pp. 519-527 (invited paper).
35. Pelegri A.A., Kardomateas G.A. and Malik B.U., "The Fatigue Growth of Internal Delaminations Under Compressive Loading in Cross Ply Composite Plates", in Composite Materials: Fatigue and Fracture (Sixth Volume), ASTM STP 1285, E.A. Armanios ed., American Society for Testing and Materials, Philadelphia, 1997, pp. 146-163, (papers presented on May 16-17, 1995, Denver, Colorado).
36. Carlson R.L., Steadman D.L., Dancila D.S. and Kardomateas G.A., "Fatigue Growth of Small Corner Cracks in Aluminum 6061-T651", presented at the FAA-NASA Symposium on Continued Airworthiness of Aircraft Structures, August 28-30, 1996, Atlanta, GA.
37. Huang H. and Kardomateas G.A., "Post Buckling Analysis of Multiple Delaminated Composite Plates", Proceedings of the American Society for Composites, Eleventh Technical Conference, October 7-9, 1996 , Atlanta, GA, pp. 168-177.
38. Carlson R.L., Steadman D.L., Dancila D.S. and Kardomateas G.A., "Fatigue Growth of Small Corner Cracks in Aluminum 6061-T651", presented at the First International Conference on Fatigue Damage in Structural Materials, September 22-27, 1996, Hyannis, MA.
39. Kardomateas G.A., "Koiter-based Solution for the Initial Postbuckling Behavior of Moderately Thick Orthotropic and Shear Deformable Cylindrical Shells Under External Pressure", presented at the 1996 ASME Mechanics & Materials Conference, The Johns Hopkins University, June 12-14, 1996.
40. Sheinman I. and Kardomateas G.A., "Energy Release Rate and Stress Intensity Factors for Non-Homogeneous Delaminated Composites", presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, Nov 17-22, 1996, Atlanta, GA (invited).
41. Kardomateas G.A. and A.A. Pelegri, "Fatigue Delamination Growth Under Cyclic Compression in Glass/Epoxy Unidirectional and Crossply Composite Plates", presented at the 1996 ASME International Mechanical Engineering Congress and Exposition, Nov 17-22, 1996, Atlanta, GA (invited).
42. Cho H., Valle C.S. and Kardomateas G.A., "Thermal Shock Stresses in an Orthotropic Thick Cylindrical Shell", Proceedings of the Second International Symposium on Thermal Stresses and Related Topics (Thermal Stresses '97), June 8-11, 1997, Rochester, New York.
43. Kardomateas G.A., "The Initial Postbuckling Behavior of Moderately Thick Orthotropic Shells Under External Pressure", presented at the McNU '97, the 1997 Joint ASME, ASCE and SES Summer Meeting, June 29-July 2, 1997, Northwestern University, Evanston, Illinois.
44. Ferrie C.H. and Kardomateas G.A., "Effect of Shear Deformation on the Postbuckling and Growth Characteristics of Delaminated Composites", presented at the McNU '97, the 1997 Joint ASME, ASCE and SES Summer Meeting, June 29-July 2, 1997, Northwestern University, Evanston, Illinois.
45. Pelegri A.A. and Kardomateas G.A., "Intralayer Cracking in Delaminated Glass/Epoxy and Graphite/Epoxy Laminates Under Cyclic or Monotonic Loading", Proceedings, 39th AIAA/ASME/ASCE/AHS/ASC SDM Conference, April 20-23, 1998, Long Beach, CA, pp. 1534-1544 (Paper no. AIAA-98-1879).
46. Steadman D.L., Carlson R.L. and Kardomateas G.A., "Expert System Model of Small Fatigue Crack Growth", Proceedings, 39th AIAA/ASME/ASCE/AHS/ASC SDM Conference, April 20-23, 1998, Long Beach, CA, pp. 3003-3013 (Paper no. AIAA-98-2064).
47. Kardomateas G.A., "Effect of Scale on the Imperfection Sensitivity of Orthotropic Shells", Thirteenth U.S. National Congress of Applied Mechanics, June 21-26, 1998, Gainesville, FLorida.
48. Huang H. and Kardomateas G.A., "Post-Buckling Behavior of Multiply Delaminated Composite Plates", Thirteenth U.S. National Congress of Applied Mechanics, June 21-26, 1998, Gainesville, FLorida.
49. Huang H. and Kardomateas G.A., "Mixed-Mode Stress Intensity Factors for Composite Plates with Single Delamination Under Compression", SES'98, 35th Annual Technical Meeting, Society of Engineering Science, September 27-30, 1998, Washington State University, Pullman, Washington (Proceedings edited by Hussein M. Zbib).
50. Huang H. and Kardomateas G.A., "Stress Intensity Factor Calculations for Finite Anisotropic Strips Using the Continuous Dislocation Method ", ME'98, the 1998 International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California.
51. Ferrie C. H., Sheinman I. and Kardomateas G.A., "Shear Deformation Effects on the Postbuckling and Growth of Delaminated Composites", ME'98, the 1998 International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California.
52. Kardomateas G.A., "Growth of Core/Face-Sheet Interface Cracks in Sandwich Beams Under Compression or Bending", ME'98, the 1998 International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California.
53. Kardomateas G.A., "Torsional Buckling of Thick Composite Cylindrical Shells", ME'98, the 1998 International Mechanical Engineering Congress and Exposition, November 15-20, 1998, Anaheim, California.
54. Kardomateas G.A., "Fracture Mechanics and Fatigue Issues for Anisotropic Composite versus Isotropic Metallic Structures", AHS National Specialists' Meeting on Affordable Composite Structures (American Helicopter Society), October 7 & 8, 1998, Bridgeport, Connecticut.
55. La Saponara V. and Kardomateas G.A., "Crack Branching in Layered Composites: Tests and Interpretations, 40th AIAA/ASME/ASCE/AHS/ASC SDM Conference, April 14-17, 1999, St. Louis, MO, paper no. AIAA 99-1486.
56. Kardomateas G.A. "Multiaxial Static and Fatigue Response of Debonded Composite Plate and Shell Structures", ONR (Office of Naval Research) Workshop on Mechanics of Composites for Ship Structures, 28-30 April 1999, Carderock, Maryland.
57. Kardomateas G.A. and Simitses G.J., "Imperfection Sensitivity of Moderately Thick Composite Cylindrical Shells", ICCM-12, Twelfth International Conference on Composite Materials, 5-9 July 1999, Paris, France, (Proceedings edited by T. Massard and A. Vautrin, p. 200).
58. Kardomateas G.A. and Huang H. "Mixed Mode I and II Stress Intensity Factors for Edge Cracks in Anisotropic Infinite Strips", ICCM-12, Twelfth International Conference on Composite Materials, 5-9 July 1999, Paris, France, (Proceedings edited by T. Massard and A. Vautrin, p. 321).
59. Li R., Frostig Y. and Kardomateas G.A., “Buckling and Postbuckling of Sandwich Beams with Delaminated Faces Based on Higher Order Core Theory”, presented at the ME’99, the 1999 International Mechanical Engineering Congress & Exposition, November 14-19, 1999, Nashville, Tennessee, and published in AD-vol. 58, Advances in Aerospace Materials and Structures, edited by G. Newaz, pp. 1-9.
60. Huang H., Kardomateas G.A. and La Saponara V., “Mixed Mode Interface Cracks in a Bi-Material Half Plane and a Bi-Material Strip”, presented at the ME’99, the 1999 International Mechanical Engineering Congress & Exposition, November 14-19, 1999, Nashville, Tennessee, and published in AMD-vol. 235, Thick Composites for Load Bearing Structures, edited by Y.D.S. Rajapakse and G.A. Kardomateas, pp. 21-32.
61. La Saponara V., Huang H. and Kardomateas G.A., “Crack Branching Off an Interface Between Anisotropic Thin Strips”, presented at the ME’99, the 1999 International Mechanical Engineering Congress & Exposition, November 14-19, 1999, Nashville, Tennessee, and published in MD-vol. 86/AMD-vol. 232, Durability and Damage Tolerance of Composite Materials and Structures-1999, edited by A. Pelegri, W.S. Chan, A. Haque and M.V. Hosur, pp. 115-123.
62. Kardomateas G.A., “Postbuckling and Growth Behavior of Face-Sheet Delaminations in Sandwich Composites”, presented at the ME’99, the 1999 International Mechanical Engineering Congress & Exposition, November 14-19, 1999, Nashville, Tennessee, and published in AMD-vol. 235, Thick Composites for Load Bearing Structures, edited by Y.D.S. Rajapakse and G.A. Kardomateas, pp. 51-60.
63. Kardomateas G.A., “The Effect of Normal Strains in the Buckling of Thick Orthotropic Cylindrical Shells Under External Pressure”, presented at the ME’99, the 1999 International Mechanical Engineering Congress & Exposition, November 14-19, 1999, Nashville, Tennessee.
64. Huang H., Kardomateas G.A. and La Saponara V., “Mixed Mode Interface or Parallel to the Interface Cracks in a Bi-Material Half Plane”, presented at the SECTAM XX, the Twentieth Southeastern Conference on Theoretical and Applied Mechanics, April 16-18, 2000, Callaway Gardens, Pine Mountain, Georgia.
65. Kardomateas G.A., “The Effect of Normal Strains in the Buckling of Thick Orthotropic Cylindrical Shells Under External Pressure”, presented at the SECTAM XX, the Twentieth Southeastern Conference on Theoretical and Applied Mechanics, April 16-18, 2000, Callaway Gardens, Pine Mountain, Georgia.
66. Huang H. and Kardomateas G.A., "Mixed-Mode Stress Intensity Factors for Cracks Located at or Parallel to the Interface in Bi-Material Domains", Proceedings, Fifteenth Technical Conference of the American Society for Composites, Sept 25-27, 2000, College Station, Texas, edited by O.O. Ochoa, T.K. O'Brien, D. Lagoudas and H.J. Sue, pp. 861—877, Technomic Publishing, Lancaster, PA, USA.
67. Kardomateas G.A. and Huang H., “An Asymptotic Solution for the Response of Face-Sheet Delaminations/Debonds Under Compression”, presented at the ME'00, the 2000 International Mechanical Engineering Congress & Exposition, November 5-10, 2000, Orlando, Florida and published in ASME AD-vol. 62/AMD-vol. 245, Mechanics of Sandwich Structures, edited by Y.D.S. Rajapakse, G.A. Kardomateas and V. Birman, pp. 133-142, 2000.
68. Kardomateas G.A., “Elasticity Solutions for a Sandwich Orthotropic Cylindrical Shell Under External/Internal Pressure and Axial Load”, presented at the ME'00, the 2000 International Mechanical Engineering Congress & Exposition, November 5-10, 2000, Orlando, Florida and published in ASME AD-vol. 62/AMD-vol. 245, Mechanics of Sandwich Structures, edited by Y.D.S. Rajapakse, G.A. Kardomateas and V. Birman, pp. 191-200, 2000.
69. Li R., La Saponara V. and Kardomateas G.A., “Nonlinear Behavior of Sandwich Panels with Delaminations inside Face Sheets Based on Refined Higher Order Core Theory”, presented at the ME'00, the 2000 International Mechanical Engineering Congress & Exposition, November 5-10, 2000, Orlando, Florida and published in ASME AD-vol. 63, Proceedings of the ASME Aerospace Division 2000, edited by J.D. Whitcomb, P. Hajela, A.M. Waas and B.V. Sankar, pp. 93-103, 2000.
70. Kardomateas G.A. and Simitses G.J., "Buckling of Sandwich Wide Columns", 42th AIAA/ASME/ASCE/AHS/ASC SDM Conference, April 16-19, 2001, Seattle, WA, paper no. AIAA-2001-1393.
71. Kardomateas, G.A., "Global Buckling and Initial Post-buckling Behavior of Sandwich Beams Including Transverse Shear", ME2001, the 2001 International Mechanical Engineering Congress & Exposition, November 11-16, 2001, New York, NY.
72. Kardomateas, G.A., "Three-Dimensional Elasticity Solution for the Buckling of Sandwich Columns", ME2001, the 2001 International Mechanical Engineering Congress & Exposition, November 11-16, 2001, New York, NY.
73. Kardomateas, G.A., "Comparative Studies on the Buckling of Sandwich and Homogeneous Composite Structures", IMECE 02, the 2002 International Mechanical Engineering Congress & Exposition, November 17-22, 2002, New Orleans, Louisiana.
74. Kardomateas, G.A. and Simitses G.J., "Three-Dimensional Elasticity Solutions for the Buckling of Sandwich Structures", IMECE 02, the 2002 International Mechanical Engineering Congress & Exposition, November 17-22, 2002, New Orleans, Louisiana.
75. Li R. and Kardomateas, G.A., "Prediction of Branching from Debonds in Sandwich Composites", ME2001, the 2001 International Mechanical Engineering Congress & Exposition, November 11-16, 2001, New York, NY.
76. Li, R. and Kardomateas, G.A., 2001. On Delamination Branching of Anisotropic Bimaterials. Proceedings of 2001 ASME International Mechanical Engineering Congress & Exposition, Nov. 11-16, 2001, New York, NY, AD-Vol. 66, (edited by A.M. Waas and J.D. Whitcomb), pp. 111-120, 2001.
77. Kardomateas, G.A., "Buckling of Sandwich Shells", ME2001, the 2001 International Mechanical Engineering Congress & Exposition, November 11-16, 2001, New York, NY.
78. La Saponara V. and Kardomateas, G.A., "Tests on the Compressive Behavior of Debonds in Sandwich Beams", ME2001, the 2001 International Mechanical Engineering Congress & Exposition, November 11-16, 2001, New York, NY.
79. Kardomateas G.A. and Simitses G.J., “Buckling of Long Sandwich Cylindrical Shells Under Pressure”, 14th US National Congress of Theoretical and Applied Mechanics, June 23-28, 2002, Blacksburg, VA.
80. Kardomateas G.A., La Saponara V. and Simitses G.J., “Experimental Observations on the Delamination Behavior in Composite Structures”, 14th US National Congress of Theoretical and Applied Mechanics, June 23-28, 2002, Blacksburg, VA.
81. Kardomateas G.A. and Simitses G.J., “Buckling of Long Sandwich Cylindrical Shells Under Pressure”, The Sixth International Conference on Computational Structures Technology, 4-6 September, 2002, Prague, Czech Republic, Proceedings edited by B.H.V. Topping and Z. Bittnar.
82. Kardomateas, G.A., “Wrinkling of Wide Sandwich Panels/Beams by an Elasticity Approach”, Proceedings, 6th International Conference on Sandwich Structures, March 31 to April 2, 2003, Ft. Lauderdale, Florida, edited by Jack R. Vinson, Yapa D.S. Rajapakse and Leif A. Carlsson, CRC Press, pp. 142-153.
83. Li, Renfu and Kardomateas, G.A., “Thermoelastic Crack Branching in General Anisotropic Media (I)”, Proceedings of the 5th International Congress on Thermal Stresses and Related Topics, TS2003, 8-11 June 2003, Blacksburg, VA, pp. WM-2-2-1 to WM-2-2-4, edited by L.Librescu and P. Marzocca.
84. Li, Renfu and Kardomateas, G.A., “Thermoelastic Crack Branching in General Anisotropic Media (II)”, Proceedings of the 5th International Congress on Thermal Stresses and Related Topics, TS2003, 8-11 June 2003, Blacksburg, VA, pp. WM-2-2-5 to WM-2-2-8, edited by L.Librescu and P. Marzocca.
85. Kardomateas, G.A. “Wrinkling and Global Buckling of Wide Sandwich Panels/Beams with Orthotropic Phases by a Three-Dimensional Elasticity Approach”, presented at the 2003 ASME International Mechanical Engineering Congress, November 15-21, 2003, Washington, DC.
86. Kardomateas, G.A., Simitses, G.J. and Birman V., “Thermo-Elastoviscoplastic Postbuckling Analysis of Structures”, presented at the 2003 ASME International Mechanical Engineering Congress, November 15-21, 2003, Washington, DC.
87. Kardomateas, G.A. and Li R., “Thermoelastic Crack Branching in General Anisotropic Media”, presented at the 2003 ASME International Mechanical Engineering Congress, November 15-21, 2003, Washington, DC.
88. Holmes, J.W. and Kardomateas, G.A., “Fatigue of Metallic Thermal Protection Systems”, presented at the 2003 ASME International Mechanical Engineering Congress, November 15-21, 2003, Washington, DC.
89. Liu L., Kardomateas, G.A. and Holmes J.W.., “A Dislocation Approach for the Thermal Stress Intensity Factors of a Crack in an Infinite Anisotropic Medium Under Uniform Heat Flow”, presented at the SAMPE 2004, May 16-20, 2004, Long Beach, CA (Session on Fire Performance IV: Structural Modeling).
90. Liu L., Holmes J.W. and Kardomateas G.A., “An Apparatus for Shear Strength and Fully Y-Reversed Shear Fatigue of Composite and Sandwich Materials”, ASC/ASTM-D30 Joint 19th Annual Technical Conference, October 17-20, 2004, Atlanta, GA.
91. Carlson R., Cappelli M. and Kardomateas G.A., “Scatter in Small Fatigue Crack Growth”, presented at the International Heli Trade Conference, 5-7 October 2004, Geneva, Switzerland.
92. Li R. and Kardomateas G.A., “Thermoelastic Interface Delamination Branching Behavior in Dissimilar Anisotropic Bimaterials”, ASC/ASTM-D30 Joint 19th Annual Technical Conference, October 17-20, 2004, Atlanta, GA.
93. Li R. and Kardomateas G.A., “Mode III Interface Crack Behavior in Magneto-Electro-Elastic Dissimilar Bimaterial Media”, ASC/ASTM-D30 Joint 19th Annual Technical Conference, October 17-20, 2004, Atlanta, GA.
94. Liu L., Holmes J.W. and Kardomateas G.A., “Tensile and Shear Fatigue of Metallic Thermal Protection Systems”, 2004 ASME International Mechanical Engineering Congress, November 13-19, 2004, Anaheim, CA.
95. Kardomateas G.A., “Thermal Buckling of a Fire-Exposed Axially Restrained Composite Column/Plate”, 2004 ASME International Mechanical Engineering Congress, November 13-19, 2004, Anaheim, CA.
96. Birman V., Kardomateas G.A. and Simitses G.J., “Behavior of Composite Laminates and Sandwich Panels Subject to Compression and Fire”, 46th AIAA/ASME/ASCE/AHS/ASC SDM (Structures, Structural Dynamics and Materials) Conference, April 18-21, 2005, Austin, TX.
97. Kardomateas, G.A., “Global Buckling of Wide Sandwich Panels With Orthotropic Phases: An Elasticity Solution”, Sandwich Structures 7: Advancing with Sandwich Structures and Materials, Proceedings of the 7th International Conference on Sandwich Structures, Aalborg University, Aalborg, Denmark, 29-31 August 2005, edited by O.T. Thomsen, E. Bozhevolnaya and A. Lyckegaard, published by Springer, pp. 57-66.
98. Liu L., Holmes J.W., Kardomateas G.A. and Birman V., “Compressive Response of Composites Under Combined Fire and Compression Loading”, CIF-4, Fourth International Conference on Composites In Fire, 15-16 September 2005, University of Newcastle Upon Tyne, England, U.K.
99. Birman V., Kardomateas G.A., Simitses G.J. and Li R., “Effect of Heat Flux on Stresses and Deformations in Compressed Sandwich Composite Panels”, IMECE-05, ASME International Mechanical Engineering Congress and Exhibition, November 5-11, 2005, Orlando, FL.
100. Kardomateas G.A. and Li R., “Buckling of multi-walled carbon nanotubes subjected to thermal and mechanical loading by nonlocal elasticity”, IMECE-05, ASME International Mechanical Engineering Congress and Exhibition, November 5-11, 2005, Orlando, FL.
101. Liu L., Holmes J.W., Kardomateas G.A., Li R. and Birman V., “Experimental and Analytical Studies on the Structural and Failure Response of Composites under Combined Applied Compression and Heat Flux due to Fire”, IMECE-05, ASME International Mechanical Engineering Congress and Exhibition, November 5-11, 2005, Orlando, FL.
102. Cappelli M.D., Carlson R.L. and Kardomateas, G.A., “On Scatter in Fatigue Crack Growth”, 9th Joint FAA/DoD/NASA Conference on Aging Aircraft, March 6-9, 2006, Atlanta, GA.
103. Li R. and Kardomateas G.A., “Thermal Buckling of Multi-walled Carbon Nanotubes by Nonlocal Elasticity”, IMECE-06, ASME International Mechanical Engineering Congress and Exhibition, November 5-10, 2006, Chicago, IL.
104. Cappelli M., Carlson R. and Kardomateas G.A., “Non-Deterministic Methods for the Evolution of Small Fatigue Crack Clusters”, 48th AIAA/ASME/ASCE/AHS/ASC SDM (Structures, Structural Dynamics and Materials) Conference, April 23-26, 2007, Honolulu, Hawaii, paper AIAA-2007-2380.
105. Kardomateas, G.A., Birman V. and Simitses G.J., “Composites-In-Fire: Structural Integrity and Residual Strength”, COMP07, the 6th International Symposium on Advanced Composites, May 16-18, 2007, Corfu, Greece.
106. Li R. and Kardomateas, G.A., “Vibration Characteristics of Multi-Walled Carbon Nanotubes Embedded in Elastic Media by a Nonlocal Elastic Shell Model”, IMECE-07, ASME International Mechanical Engineering Congress and Exhibition, November 11-15, 2007, Seattle, WA.
107. Li R., Kardomateas, G.A. and Simitses, G.J. “Nonlinear Response to Blast Loading of Shallow Composite Sandwich Shells with Compressible Cores”, IMECE-07, ASME International Mechanical Engineering Congress and Exhibition, November 11-15, 2007, Seattle, WA.
108. Kardomateas, G.A. and Simitses, G.J. “Buckling Strength of Composites Subjected to Fire”, IMECE-07, ASME International Mechanical Engineering Congress and Exhibition, November 11-15, 2007, Seattle, WA.
109. Li R., Kardomateas, G.A. and Simitses, G.J. “Blast Nonlinear Response of Composite Sandwich Plates with Compressible Cores”, ICSS8, the 8th International Conference on Sandwich Structures, May 6-8, 2008, Porto, Portugal.
110. Cappelli M., Carlson, R.L.. and Kardomateas, G.A. “The Evolution of Multisite Small Cracks under Fatigue Loading”, IMECE-08, ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, MA.
111. Kardomateas, G.A. and Li R., “Three-Dimensional Elasticity Solution for Sandwich Plates with Orthotropic Phases and Comparison with the High-Order Librescu Theory”, IMECE-08, ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, MA.
112. Li R. and Kardomateas, G.A., “Characteristics of Interface Cracks in Piezoelectric/Piezomagnetic Elastic Anisotropic Bimaterial Composites”, IMECE-08, ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, MA.
113. Li R., Kardomateas, G.A. and Simitses, G.J., “Blast Dynamic Response of Composite Sandwich Plates under Uniformly Distributed and Point-Wise Loading”, IMECE-08, ASME International Mechanical Engineering Congress and Exposition, October 31-November 6, 2008, Boston, MA.
114. Li, R. and Kardomateas, G.A., “Characteristics of Thermal Fracture in Composite Structures”, TS2009, 8th International Congress on Thermal Stresses, 2009, June 1- 4, Urbana-Champagne, IL, June 1-4, 2009.
115. Kardomateas, G.A., “Structural Integrity and Residual Strength of Composites Exposed to Fire”, Symposium on Recent Advances in Mechanics, Dedicated to P.S. Theocaris, Athens, Greece, Sept 17-19, 2009, (edited by A.N. Kounadis and E.E. Gdoutos), pp. 67-68.
116. Kardomateas, G.A., “A Comparative Study of Sandwich Buckling Formulas”, IMECE-09, ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Lake Buena Vista, FL.
117. Kardomateas, G.A., “One Dimensional High Order Theories for Sandwich Structures”, IMECE-09, ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Lake Buena Vista, FL.
118. Kardomateas, G.A., “Elasticity Solutions for the Buckling of Thick Sandwich Cylindrical Shells under External Pressure”, IMECE-09, ASME International Mechanical Engineering Congress and Exposition, November 13-19, 2009, Lake Buena Vista, FL.
119. Kardomateas, G.A. , Bergreen, C and Carlsson L.A., “Energy Release Rate and Mode-Mixity for a General Asymmetric Debonded Sandwich Specimen”, ICSS-9, June 13-16, 2010, Caltech, Pasadena, CA, 2010.
120. Kardomateas, G.A., “Elasticity Solutions for the Buckling of Sandwich Orthotropic Wide Panels/Beams and Cylindrical Shells”, ICSS-9, June 13-16, 2010, Caltech, Pasadena, CA, 2010 (Keynote).
121. Phan, C., Kardomateas, G.A. and Frostig, Y., “A New High Order Theory for Asymmetric Sandwich Wide Panels/Beams Applicable to a Wide Range of Cores with Applications to Buckling”, IMECE-10, ASME International Mechanical Engineering Congress and Exposition, November 12-18, 2010, Vancouver, British Columbia, Canada.
122. Phan, C., Kardomateas, G.A. and Frostig, Y., “Dynamic Analysis of Sandwich Composite Beams/Wide Panels Using Higher-Order Theories”, IMECE-11, ASME International Mechanical Engineering Congress and Exposition, November 11-17, 2011, Denver, Colorado, USA.
123. Phan, C., Kardomateas, G.A. and Frostig, Y., “Buckling of Sandwich Beams using the Extended High Order Sandwich Panel Theory and Comparison with Elasticity”, ICCM-18, 18th International Conference on Composite Materials, August 21-26, 2011, Jeju Island, Korea.
124. Kardomateas, G.A., Frostig, Y. and Phan, C., “Transient Blast Response of Sandwich Beams/Wide Plates based on Dynamic Elasticity”, ICSS-10, 10th International Conference on Sandwich Structures, August 27-29, 2012, Nantes, France.
125. Kardomateas, G.A., Berggreen C. and Carlsson L.A., “Closed form Expressions for the Energy Release Rate and Mode Mixity of a Face/Core Debond”, ICSS-10, 10th International Conference on Sandwich Structures, August 27-29, 2012, Nantes, France.
126. Phan, C.N., Frostig, Y. and Kardomateas, G.A., “Free Vibration of Sandwich Panels – Elasticity versus High-Order and Classical Computational Models”, Society of Engineering Schience 49th Annual Technical Meeting, October 10-12, 2012, Atlanta, GA, USA.
127. Phan, C.N., Kardomateas, G.A., Bailey N. and Battley M., “Wrinkling of Sandwich Wide Panels/Beams based on High Order Sandwich Panel Theories and Comparison with Elasticity and Experiments”, ASME 2012 International Mechanical Engineering Congress & Exposition, Nov. 9-15, 2012, Houston, Texas, USA.
128. Phan, C.N., Kardomateas, G.A. and Frostig Y., “The Dynamic Extended High-Order Sandwich Panel Theory (EHSAPT): Blast Response of a Sandwich Beam/Wide Plate and Comparison with Elasticity”, ASME 2012 International Mechanical Engineering Congress & Exposition, Nov. 9-15, 2012, Houston, Texas, USA.
129. Kardomateas, G.A., “Static and Dynamic Response of Sandwich Composite Panels: A new High Order Theory and Comparison with Elasticity”, 10th HSTAM International Congress on Mechanics, May 25-27, 2013, Chania, Crete, Greece (Plenary Lecture).
130. Berggreen,C., Kardomateas, G.A. and Carlsson, L.A., “Pure Moment Approach to Determine Mixed-Mode Fracture Toughness of Sandwich Face/Core Interfaces”, ICCM19, 19th International Conference on Composite Materials, July 28-Aug 2, 2013, Montreal, Canada.
131. Kardomateas, G.A., Rodcheuy N. and Frostig Y., “Transient Blast Response of Sandwich Plates via Dynamic Elasticity”, ASME 2013 International Mechanical Engineering Congress & Exposition, Nov. 15-21, 2013, San Diego, CA, USA.
132. Frostig Y. and Kardomateas, G.A.., “High-Order Buckling of Annular Sandwich Plates”, ASME 2013 International Mechanical Engineering Congress & Exposition, Nov. 15-21, 2013, San Diego, CA, USA.
133. Yuan, Z., Frostig, Y. and Kardomateas, G.A., “Geometric Nonlinearity Effects in the Static and Dynamic Response of Sandwich Beams/Wide Plates”, ASME 2014 International Mechanical Engineering Congress & Exposition, Nov. 14-20, 2014, Montreal, Canada.
134. Kardomateas, G.A., Berggreen, C. and Carlsson, L., “Mode Mixity and Energy Release Rate of Face/Core Debonds in Sandwich Beams”, ASME 2014 International Mechanical Engineering Congress & Exposition, Nov. 14-20, 2014, Montreal, Canada.
135. Kardomateas, G.A., Frostig, Y. and Rodcheuy, N., “Extended High Order Theory for Sandwich Panels and Comparison with Elasticity”, ICCM 20, 20th International Conference on Composite Materials, 19-24 July 2015, Copenhagen, Denmark.
136. Yuan, Z., Kardomateas, G.A and Frostig. Y., “Nonlinear Behavior of Sandwich Panels based on the Extended High Order Sandwich Panel Theory”, ASME 2015 International Mechanical Engineering Congress & Exposition, Nov. 13-19, 2015, Houston, TX, USA.
137. Rodcheuy, N., Frostig. Y. and Kardomateas, G.A and, “Curved Sandwich Panel formulation of the Extended High Order Sandwich Panel Theory and Comparison with Elasticity”, ASME 2015 International Mechanical Engineering Congress & Exposition, Nov. 13-19, 2015, Houston, TX, USA.
138. Kardomateas, G.A., Yuan, Z., and Frostig. Y., “Geometrically High Order Nonlinear Analysis of Flat and Curved Sandwich Panels”, ICSS-11, 11th International Conference on Sandwich Structures, March 20-22, 2016, Florida Atlantic University, Ft. Lauderdale, FL, USA.
139. Kardomateas, G.A., “Buckling and Wrinkling of Sandwich Composite Plates and Shells”, 11th HSTAM International Congress on Mechanics, Athens, Greece, May 27-30, 2016 (keynote).